Overview of V-300 series:

V-300

• The V-300 sealer can vacuum seal to effectively help preserve food product freshness, prevent oxidation of metal part.
• Using high-quality components from Japan helps the machine operate continuously for a long time.
• The machine is equipped with a safety feature so the breaker will turn off automatically, and the power shuts off when an abnormal overheating for more than 3 seconds due to a fault of components.

 Vacuum sealer V-300-10/10D is the perfect product to protect perishable foods, preserve food product freshness, and prevent oxidation such as components, chemicals, mechanical components…etc. The machine is integrated with two features sealing and vacuuming. And, customers can switch between 2 features easily. V-300 brings many outstanding features such as:

• Compact size, lightweight, easy to move. Operation with two features "just sealing" or "both sealing and vacuuming"
• Simple to operation, the V-300 series is ideal for the counter. You can seal it immediately when the customer needs. It helps confidence in the freshness of the product
• Vacuum: vacuum flow 10 Liters / minute, vacuum pressure -58.6Kpa (Available)
• The width of sealing can replace by 10mm if the width is pre-installed on the machine or you can also replace the 5mm width. For the V-300-10D series is only 10mm width.
• Standard equipped filter: A filter for collecting foreign objects that were taken in from the nozzle comes standard equipped. This filter is easy to disassemble and install so you can clean it regularly.

Operating the V-300 is simple and fast:

After installing the press table for the machine, you can use the V-300 sealer vacuum easily:
1. Turn on the power switch
2. Set heating time “Heat”
3. Set vacuum time “Vacuum”
4. Pull nozzle lever towards you, bring out the suction nozzle.
5. Insert the mouth of the bag into the vacuum nozzle, stretching the pouch to minimize wrinkles, press the press table until you hear a 'click' sound.
6. Press the button “Vacuum start” to vacuum.
7. Use your hand to return the nozzle lever back to the initial position (vacuum process is complete) and push down the press table again to sealing the bag.
8. The sealing process process ends when you hear "Beep", the heating light turns from red to green and turns off, then you release your hand from the press table to finish the process and take out the product.

 Specifications:

 Manual:

Manual for sealer V-300/V-300-10D

Video:

• FIV-400R-35-10 Series
• V-300R-35 Series
• V-301/V-301-10D Series
• V-301R-35 Series
• V-460 Series
• VY-600 Series